A:Hydraulic hydraulic system, it can be said that this is an important part, it can not be scorned and sloppy. In the course of its use, it has some precautions, so it can be known that the answer to question one is yes. Among these precautions, one of the more important points is to avoid the inclusion of foreign matter or foreign matter in the hydraulic oil, to have clean hydraulic oil, and to have good heat dissipation.
The electromagnetic reversing valve in the hydraulic machine is connected with the wiring switch. The specific operation is as follows: there are generally three wires in the electromagnetic reversing valve, but only two wires are needed, and the voltage specific value is also to be seen. . Generally speaking, the plug has a light inside, so the two wires only need to be connected to the two terminals connected to the lamp, so that the purpose can be achieved.
A:How to carry out the inspection of the hydraulic clutch device, the hydraulic machine manufacturer Wuxi Power believes that this work is not difficult and complicated, mainly depends on how the device is worn and whether it is replaced with a new one.
A:The hydraulic press is not suitable for the blanking process. The specific reason is that the machining requirements are not well met in the punching speed, so the hydraulic press is generally not used in the punching operation.
A:Before the hydraulic machine is used, it is an important task from a professional point of view. It needs to be taken seriously and because it is related to the performance and service life of the hydraulic machine.
A:Three production lines