The pressure of the hydraulic press, which is an important parameter of the hydraulic press, can not be taken lightly and sloppy, so as not to affect the normal use of the hydraulic press.
The hydraulic machine is in the work content, which is specifically as follows: First, it is necessary to check the oil pool, oil level and oil meter to meet the prescribed standards. If it does not meet the requirements, it should be replenished in time; secondly, check whether the button is flexible and has no jam. Check the motor wiring for looseness, detachment or damage.
A:Before the hydraulic machine is used, it is an important task from a professional point of view. It needs to be taken seriously and because it is related to the performance and service life of the hydraulic machine.
This problem, in the view of hydraulic machine manufacturer Parfit, the answer is that because of the hydraulic machine, it is suitable for bending, forming and flanging the central load parts, if it is matched with Punching and blanking can also be performed by punching the cushioning device.
The hydraulic press is a machine for realizing the machining process according to the Pascal principle. It is a kind of liquid, which is a working medium. Through the change of pressure, the static pressure of the liquid is used to process metal, rubber, powder and the like. The hydraulic press can be divided into a hydraulic press and a hydraulic press according to the different liquid medium inside. The hydraulic press mainly uses the control of water and oil balance to work with static pressure transmission.
The CNC hydraulic bending machine refers to the double-cylinder up-type CNC hydraulic bending machine, which drives the extension and return of the left and right cylinders through various valve actions on the servo proportional valve, thereby driving the slider to rise and fall.